Micro Stations To SPEAK with us, for INFORMATION or to place an ORDER:                                     Tel: 01392 487 026  Fax: 01392 340 430  France: +33 977 21 97 22                                           Email: info@tandpd.co.uk                                              

Please note: ALL prices quoted exclude VAT except for where stated otherwise

Home
Up
SEWAGE TREATMENT
SEWAGE PUMPS
RAIN HARVESTERS
GREY WATER STORAGE
WATER PUMPING
GREASE TRAPS
PUMP CONTROLS
BARE TANKS
CONTACT US
CONDITIONS of SALE

T&PD Micro Pump Stations are designed to overcome the problems of extending and adding to existing homes.

It is not always possible to get an adequate 'fall' to drain the waste water and sewage. This is where our Micro Pump Stations come into their own. A Micro Pump Station is also a LOW COST solution!

For pdf drawings of our full range of MICRO CHAMBERS please click HERE

The T&PD MICRO 700 (pictured right) comes COMPLETE and ready to install. The Micro 700 comes ready to install and costs from £599 plus delivery

The T&PD Micro 550 (pictured left) comes COMPLETE and is a similar specification but comes with a GUIDE RAIL mounted pump. The Micro 550 comes ready to install and costs from £690 plus delivery.

OPTIONAL Mains/Battery back-up HIGH LEVEL ALARM:  £169  delivered when purchased & delivered with a Pump Station or Micro Station.

Warranty is 5 years on the Chamber and fittings and full Manufacturers warranty on all Pump(s).

PLEASE ! BEFORE YOU BUY:- MAY WE CHECK YOUR CALCULATIONS FOR YOU?  Please complete the short questionnaire - Please click  HERE - and fax/email it to us. We will reply within 24 hours and we will ensure that your Micro Station will achieve a MINIMUM pumping rate of 2.5 litres per second for self-cleansing of the 2" discharge pipework OTHERWISE, in time, the pipework will suffer furring and clog!

The FULL specifications of our MICRO 700 and 550 are:

PUMP CHAMBER: MICRO 700 - 700mm diameter/1.2 metres deep, MICRO 550 - 700mm x 550mm x 1.0 metres deep - both moulded in one piece from HD polyethylene and supplied with one 4" Grommet (self fit) through which to install your incoming waste pipe. The Micro 700 chamber is pre-fitted with a 2" hose tail to a quick release pump coupling, a non-return valve and then through the tank wall to a female 63mm MDPE discharge pipe connector, The Micro 550 is fitted with a pump stool and guide rails. Both chambers are supplied with a single 240v, 2" automatic 0.4 kw VORTEX pump (max 300 l/m/ 10 metres total head) with full UK warranty, and come complete with a pump chain and chain hook. A second 4 "grommet’ is supplied to self fit into the chamber at the point where the cable duct enters the chamber. A standard 450mm x 600mm (clear access) pedestrian grade cover is supplied and this is to be set into the concrete ‘biscuit’ that covers the pump chamber and which is NOT supported by the chamber. The chambers are generally as per the following drawings:-

for the Micro 700 pdf drawing please click HERE

for the Micro 550 pdf drawing please click HERE

FOR A BUDGET PRICED PUMP STATION TO EXACTLY SUIT YOUR DEVELOPMENT Please complete the short questionnaire found HERE and fax or email it to us. We will supply you with proposals, specifications and prices for your consideration WITHIN 24 HOURS.

TO ORDER OR CONTACT US: Telephone: 01392 487 026  Fax: 01392 340 430   Email:  info@tandpd.co.uk

Hit Counter      Hits since 23.01.11 @ 15.14

Home | PUMP STATIONS | SEWAGE TREATMENT | SEWAGE PUMPS | RAIN HARVESTERS | GREY WATER STORAGE | WATER PUMPING | GREASE TRAPS | PUMP CONTROLS | BARE TANKS | CONTACT US | CONDITIONS of SALE

Questions or problems regarding this web site should be directed to [GHB].
Copyright © 2010 GHB. All rights reserved.
Last modified: 08/08/11.